Audio Testing Confirms iPhone 6 Not Yet Capable of Direct HD Audio Playback - MacRumors
Skip to Content

Audio Testing Confirms iPhone 6 Not Yet Capable of Direct HD Audio Playback

Earlier this year, Apple was rumored to be adding support for high-definition audio playback in iOS 8 and shipping new EarPods with the iPhone 6 in order to support this 24bit/96kHz standard. Apple ultimately made no such announcements for iOS 8 or the iPhone 6, and Mashable has now confirmed with some testing that Apple's latest iPhone 6 does not currently support high definition audio playback.

iphone6-stock-photo
With the help of audio testing expert David Ranada, Mashable tested several sample .wav files encoded at a 96kHz sampling rate with 24 bits per sample. The tracks were played using third-party apps such as Onkyo's HF music player and recordings were made through the headphone jack to determine the quality of the audio output.

The results show that iPhone 6 does not yet support HD audio playback, even though the audio hardware inside the phone may be capable of 24bit/96kHz output. According to teardown analyses, Apple's iPhone 6 includes the custom made Cirrus Logic 338S1201 chip, which is likely the successor to the Cirrus Logic CS42L61 chip used in previous iPhone models. Though also a custom build, the older CS42L61 chip is part of Cirrus Logic's CS42L51 family, which supports 24bit/96kHz HD audio.

It's hard to conceive of Apple either creating a custom chip that's less capable than the equivalent off-the-shelf component, let alone downgrading the audio capabilities of the iPhone's DAC in subsequent generations. So it stands to reason the DAC on board the iPhone 6 is capable of sampling 24-bit/96kHz audio.

It's possible, however, that Apple could later update iOS 8 with support for HD audio and enable the playback of hi-res music through the iPhone's headphone jack. Apple is accepting 24bit/96kHz uploads from musicians and is allegedly preparing to enable high-definition 24-bit downloads from iTunes.

Customers who want HD audio sooner will have to look at Lightning-equipped audio devices such as the recently announced Fidelio M2L headphones from Philips. The Fidelio M2Ls will connect to an iPhone or iPad via the Lightning port and will support 24-bit audio using an internal DAC and amplifier built into the headphone unit.

Related Forum: iPhone

Popular Stories

iOS 26

iOS 26.4 Adds Two New Features to CarPlay

Tuesday March 24, 2026 1:55 pm PDT by
iOS 26.4 was released today, and it includes a couple of new features for CarPlay: an Ambient Music widget and support for voice-based chatbot apps. To update your iPhone 11 or newer to iOS 26.4, open the Settings app and tap on General → Software Update. CarPlay will automatically offer the new features so long as the iPhone connected to your vehicle is running iOS 26.4 or later....
Apple Business hero

Apple Unveils 'Apple Business' All-in-One Platform

Tuesday March 24, 2026 8:53 am PDT by
Apple today announced Apple Business, a new all-in-one platform that unifies device management, productivity tools, and customer outreach features. The service is designed to be a consolidated replacement for several of Apple's existing business-focused offerings, including Apple Business Essentials, Apple Business Manager, and Apple Business Connect. It provides organizations with a single...
AirPods Pro Firmware Feature

Apple Releases New Firmware for AirPods Pro 3, AirPods Pro 2 and AirPods 4

Tuesday March 24, 2026 12:31 pm PDT by
Apple today released new firmware for the AirPods Pro 2, AirPods Pro 3, and the AirPods 4. The firmware has a version number of 8B39, up from 8B34 on the AirPods Pro 3, 8B28 on the AirPods Pro 2, and 8B21 on the AirPods 4. There is no word on what's included in the firmware, but Apple has a support document with limited notes. Most updates are limited to bug fixes and performance...

Top Rated Comments

150 months ago
So... you're telling us the iPhone doesn't have a feature that they never claimed it to have?
Score: 44 Votes (Like | Disagree)
Medic311 Avatar
150 months ago
The S version is usually when the real iPhone comes out
Score: 31 Votes (Like | Disagree)
normang Avatar
150 months ago
A whole article, based on a rumor, that Apple never announced, and most people's ears in most any ear buds or Beats are not going to notice any significant difference in quality, even if it were enabled.
Score: 23 Votes (Like | Disagree)
150 months ago
Basically iPhone 6 is a flop.

Most companies would love to have an Apple "flop"
Score: 17 Votes (Like | Disagree)
ouimetnick Avatar
150 months ago
Basically iPhone 6 is a flop.

Nah, Just the rumor mill creates unrealistic rumors, and other wishes that don't always become true, hence the term rumor.

noun
a currently circulating story or report of uncertain or doubtful truth: they were investigating rumors of a massacre | rumor has it that he will take a year off.
Score: 14 Votes (Like | Disagree)
150 months ago
There is no noticeable difference between the 44.1kHz (we mostly listen to now) and 96kHz.
The human ear can't even hear above 20kHz, and the rest is just for filter purposes.

That's not what Shannon's theorem says. It doesn't state that sampling at twice the frequency is enough to be able to reproduce a perfect signal. What it states is that if you sample under twice the frequency, there is no way you will be able to reproduce a signal at that frequency... It's a minimum, not a maximum.

For instance, a young person will hear a signal at 20kHz. To capture that signal, you need to sample at at least 40kHz. Then, that young person will be able to hear something, but you will have lost a lot of characteristics of the signal - for instance, you will not be able to know if the original signal was a sawtooth, a square or a sinusoid. So, significant information will have been lost.

That's why CD recordings sounded metallic at first. The solution, which is applied on all CDs, was to cut the frequency around 16kHz to avoid the destruction of the characteristics of the signal around Shannon frequencies.

That's why 96kHz is interesting, because it keeps quality in the upper part of the spectrum.

Moreover, 24-96 is not only about 96kHz, it's also 24 bit. And there, you gain a lot. The problem with CD and digital capture in general is that the scale is linear while most of our senses use a logarithmic scale.
The result is that when you go at the bottom of your intensity, you have a very very low resolution in your sample, while the human ear (or eye) still have a good resolution. This is especially visible in photography: if you brighten the shadows, you will see a lot of banding, because the sample resolution is very low in the shadows. It's the same problem with audio: CD killed the dynamic range (hence the loudness war), because it's not that good when you have a lot of dynamic during the low volume ports.
Score: 13 Votes (Like | Disagree)