Apple Releases Minor watchOS 3.2.2 Update

Can we please do away with the requirement to have the watch on the charger? If I have more than 50% battery, why does it have to be on the charger?

The Watch seems more susceptible to bricking if the update gets interrupted-- I'm guessing they're making damn sure the watch doesn't lose power during the process.

Hi. I guess you have a New XC90,V90, or S90. If so the problem with the remote start is not your apple devuces but is a problem with the cars software. There has been a Volvo software upgrade for this a few weeks now.
There is also a new complete Volvo software upgrade that changes the touch screen tia much better design.

Make sure your car has half a tank and is connected to the pump before attempting the update.

Will it finally fix my Volvo app being unable to start my car since changing watches or upgrading to a newer model? Something is wrong with the way the digital signature works (according to Volvo) when you change devices.

[emoji58]First world problems.

I don't believe that is correct. Removing the watch during the install process can lead to bricking the device. My friend's watch was updating then the power went out. Got the red exclamation point. Had to shipped off to Apple.

"Can", but not "will". I have, on multiple occasions(watchOS 1 to 3, Apple Watch Series 0 and 2), initiated an Apple Watch update by putting it on the charger, then taking it off once the upgrade process indicator circle appeared. I have always finished the updates with no problems whatsoever, as long as my iPhone was near the watch. I've even done this while traveling and getting Wi-Fi connection only at the beginning of the update process.

I Don't believe this is accurate. I don't have evidence and nor have I tried this, but the Apple Watch needs to be connected to the charger during the entire update process. I will Contact Apple on this tomorrow and ask, now that my curiosity is piqued.

As pointed out above, the hypothesis that the charger is required for entirety of the update process is invalid. This also invalidates the hypothesis that the charger is required for the reboot of the Apple Watch during the update process.

Once the initial update conditions are met (Wi-Fi, 50% charge, on charger) and the update starts, you can move away from those conditions and still finish the update just fine, as I and ErikGrim have done. Based on these observations, I hypothesize that the conditions were mandated in order to reduce, as much as possible, the possible fail states that lead to bricking, not that they are absolute necessities.

You're still not following what I am saying. The charger automatically reboots the watch. Maybe the installation process doesn't have the reboot automatic like iOS, so the only way is to be connected to the charger.

I'm trying to think outside the box to make a logical explanation of why the charger is required. And this completely satisfies that.

Your thinking is wrong. The requirement is only for it to be on the charger when the process is initiated. Once it starts you can wear your watch and installation continues, including reboots.

WOW! This update added steroids to my battery!

I had a very good battery life previously but after this update, on a regular usage of my watch, I woke up this morning at 6:30 a.m. and until 3:30 p.m. the battery dropped form 100% to 94% only!

In the past I had about 14-15% down in this time range. It's not placebo, I wasn't even expecting improved battery life.

This is really insane!

Apple Watch Sports Series 2

I must say that after this update I have noticed that the battery life is greatly improved over the short time its been installed and used.